Lynx Adventure 800 Скачать руководство пользователя | Manualshive

Страница: 9 / 75

background image

8

ENGLISH

7. LIMITATIONS OF LIABILITY

THIS WARRANTY IS EXPRESSLY GIVEN AND ACCEPTED IN LIEU OF ANY AND ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WAR-
RANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EX-
TENT THAT THEY CANNOT BE DISCLAIMED, THE IMPLIED WARRANTIES ARE LIMITED IN
DURATION TO THE LIFE OF THE EXPRESS WARRANTY. INCIDENTAL AND CONSEQUENTIAL
DAMAGES ARE EXCLUDED FROM COVERAGE UNDER THIS WARRANTY. SOME STATES/
PROVINCES DO NOT ALLOW FOR THE DISCLAIMERS, LIMITATIONS AND EXCLUSIONS IDEN-
TIFIED ABOVE, AS A RESULT, THEY MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH MAY VARY
FROM STATE TO STATE, OR PROVINCE TO PROVINCE.

Neither the distributor, any BRP distributor/dealer nor any other person has been authorized
to make any affirmation, representation or warranty regarding the product, other than those
contained in this limited warranty, and if made, shall not be enforceable against BRP.

BRP reserves the right to modify this warranty at any time, being understood that such mo-
dification will not alter the warranty conditions applicable to the products sold while this
warranty is in effect.

8. TRANSFER

If the ownership of a product is transferred during the warranty coverage period, this warran-
ty shall also be transferred and be valid for the remaining coverage period provided BRP or
an authorised BRP distributor / dealer receives a proof that the former owner agreed to the
transfer of ownership, in addition to the co-ordinates of the new owner.

9. CONSUMER ASSISTANCE

(a) In the event of a controversy or a dispute in connection with this limited warranty, BRP

suggests that you try to resolve the issue at the dealership level. We recommend discus-
sing the issue with the authorized distributor/dealer’s service manager or owner.

(b) If further assistance is required, the distributor’s service department should be contacted

in order to resolve the matter.

(a) If the matter still remains unresolved then contact BRP by writing to us at the address

listed below.

BOMBARDIER-NORDTRAC OY
SERVICE DEPARTMENT
P.O. BOX 8040
FIN-96101 ROVANIEMI
FINLAND

«
...
7
8
9
10
11
...
»

Содержание Adventure 800












































































Отзывы:

Нет отзывов

Похожие инструкции для Adventure 800

Бренд: E-TON Страницы: 134

TRX250EX Sportrax250EX

Бренд: Honda Страницы: 203

ErgoSteer SP001V9810010

Бренд: FENDT Страницы: 40

Бренд: Panther Страницы: 10

Бренд: Bluewheel Страницы: 50

Бренд: Ultra-tow Страницы: 15

Бренд: FarmTek Страницы: 5

1990 Electric Shuttle

Бренд: Columbia Страницы: 112

Бренд: Har-Tru Страницы: 12

Бренд: Eagle Страницы: 53

Бренд: KAYO MOTOR Страницы: 138

Бренд: Yamaha Страницы: 32

Бренд: Yamaha Страницы: 422

Бренд: Yamaha Страницы: 141

Бренд: Yamaha Страницы: 347

Бренд: ShoreLand'r Страницы: 17

Бренд: swaploader Страницы: 93

Бренд: swaploader Страницы: 106

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды