Lynx Adventure 800, Руководство оператора

Страница: 17 / 75

16
ENGLISH
NOTE: Do not use electric starter for more than 15 seconds. If start/rer button is
pressed when engine has started it could damage electric starter mechanism.
Release key as soon as the engine starts. Key returns to ON position as soon as it is released.
If engine does not start on first try, turn key back to OFF position and wait a few seconds
before restarting. To stop engine, turn key to OFF position.
NOTE : Engine may be manually started with rewind starter if necessary.
If starter does not operate, check starting system fuse condition. refer to FUSES.
START/RER button
START/RER button has two functions.
When the engine is not running, depressing the START/RER button and hold until engine has
started.
When the engine is running, depressing the START/RER button will command the engine to
reverse crankshaft rotation as driving the snowmobile is in reverse is achieved by changing
the direction of rotation of the engine, not by shifting the chain case in reverse gear.
When depressing the START/RER button, the MPEM will practically slow down the engine
RPM to a stop and advance the ignition timing to cause crankshaft rotation reversing.
Engine will automatically shift into forward when starting after stopping or stalling.
Shifting procedure will take place only when the engine is running.
If engine is running at a speed above 3800 RPM, the reverse function of the START/RER
button is cancelled.
It is recommended to warm up the engine to its normal operating temperature before shif-
ting.
Start Mode
To start engine, push START/RER button and hold until engine has started.
NOTE! Do not hold START/RER button more than 10 seconds. A rest period should be
observed between the cranking cycles to let starter cool down. Holding START/RER
button when engine has started could damage starter mechanism.
9. Tether cut-out switch
It shuts off engine preventing snowmobile to runaway if the operator falls off the vehicle
accidently.