manualshive.com logo in svg

Lynx Adventure 800, Руководство оператора

Поделиться
Скачать
Lynx Adventure 800 Скачать руководство пользователя страница 41

40

ENGLISH

NOTE!

 The 10 hour inspection is at expense of the snowmobile owner.

PRE OPARATION CHECK

• Remove snow and ice from body including seat, footrests, lights, controls and instru-

ments.

• Verify that track and idler wheels are not frozen and free to turn.
• Activate the brake control and make sure the brake fully applies before the brake control

lever touches the handlebar grip. It must fully return when released.

• Check the parking device. Apply parking brake and check if it operates easily and smoothly.
• Activate the throttle control lever several times to check that it operates easily and smoothly.
• Check operation of ignition switch, headlamp switch, taillight, brake light, pilot lamps and

tether/cut-out switches.

• Verify that skis and steering operate freely. Check corresponding action of skis versus

handlebar.

• Check fuel and injection oil for levels and leaks. Replenish as necessary and see an autho-

rized Lynx dealer in case of any leaks.

• Verify that air filter(s) is free of snow, if so equipped.
• Make certain your snowmobile is pointed away from people or objects before you start it.
• Be warmly dressed with clothing designed for snowmobiling.

OPERATING INSTRUCTION

Propulsion

Depressing throttle lever increases engine RPM causing the drive pulley to engage. Depen-
ding on models engine RPM must be between 2500 and 4200 before drive pulley engage-
ment will occur.

Outer sheave of drive pulley moves toward inner sheave, forcing drive belt to move upward
on the drive pulley and simultaneously forcing the sheaves apart on the driven pulley.

The driven pulley senses the load on the track and limits the belt movement. The result is an
optimized speed ratio between engine RPM and the speed of the vehicle at any time.

Power is transferred to the track through the chaincase or gearbox and drive axle.

Turning

Handlebar controls the steering of the vehicle. As the handlebar is rotated to right or left, the
skis are turned right or left to steer the snowmobile.

Stopping

Before riding your snowmobile, you should understand how to stop it. This  is done by
releasing the throttle and gradually depressing the brake lever on the left side of the handle-
bar.

Содержание Adventure 800












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды