Lydsto HD-STYTJ-B01, Руководство пользователя

Страница: 14 / 32

��
Put the sweeping and mopping robot on the flat indoor ground,
and remove the protection device of limit bar at both ends of the
front bumper.
Remove
Use
Remove the Limit Bar
Charging of the Sweeping and Mopping Robot
Press and hold the button for � seconds to start the sweeping and mopping robot, and then short-press
the button to make the robot recharge automatically. The robot enters the ready state once fully charged.
Fully charge the sweeping and mopping robot before starting cleaning.
Before starting the cleaning, tidy away the wires and articles on the ground
to avoid damage caused by winding, dragging and hitting during cleaning.
It is suggested to start the sweeping and mopping robot at the dust collec-
tion charging pile. When the battery is low during the cleaning, the sweeping and mopping
robot will automatically return to the dust collection charging pile for
charging, and automatically return to the interrupted place to continue
cleaning when the battery is full.