Lydsto HD-STYTJ-B01, Руководство пользователя

Страница: 16 / 32

Press and hold the button for � seconds to turn on the
machine; the power indicator blinks in white after blinking in white
slowly for � seconds, and then the sweeping and mopping robot
enters the standby state; short-press the button to start the
global cleaning; or press and hold the button for � seconds
to start the fixed-point cleaning.
When the robot i s still, press the button for � seconds to turn
off the machine. The power indicator will blink in white quickly
for � seconds and then go out.
In the process of cleaning, short-press the button , then the
sweeping and mopping robot will pause.
If the sweeping and mopping robot is still and has not operated
for more than �� minutes, it will enter the hibernate state. In the
hibernate state, you can give any button a brief press to wake up
the machine
.
On/Off/Pause
Tips: during charging, the sweeping and mopping robot cannot be
turned off.
Automatic Recharge/Manual Recharge
When the battery is low during cleaning, or when the cleaning is
finished, the sweeping and mopping robot will automatically
recharge.
During cleaning, short-press the button , then the sweeping
and mopping robot will return to the dust collection charging
pile to recharge.
Add water to the water tank or clean
the mop cloth mid way
Short-press the button to the sweeping and mopping
robot, removes the floor mopping module, add water or
clean the mop cloth, replace the floor mopping module,
and short-press the button again to continue cleaning.
Set the Cleaning Mode
The machine is in the standard mode by default; after it is
connected with APP, you can select more modes in the App.
Failure State
When the sweeping and mopping robot is abnormal, it will
give a voice prompt and the power indicator will blink in
orange. Please refer to "Troubleshooting" for solutions.
When there is no operation for �� minutes under the failure
state, the sweeping and mopping robot will hibernate
automatically.