Lydsto HD-STYTJ-B01, Руководство пользователя

Страница: 27 / 32

��
Note: The disposable mop cloth can't be reused, but the mop
cloth can be reused after cleaning.
Tips:
If the mop cloth is too dirty, it will affect the mopping effect.
Please clean it in time.
Be sure to remove the mop cloth, clean and screw dry before
replacing for use. Do not install it on the two-in-one water
tank for cleaning, otherwisethe filter element will be blocked
if the dirty water is poured backward.
The mop cloth is consumable and should be replaced every
�-� weeks.
Velcro
Remove
Install
Mop cloth fixing strip
Remove the mop cloth: as shown in the figure, press and hold the two snaps of
the mop cloth support, pull out the mop cloth support horizontally, and then tear
off the Velcro to slide the mop cloth fixing strip out of the mop cloth fixing slot.
Install the mop cloth: as shown in the figure, put the mop cloth fixing strip in the
mop cloth fixing slot, attach the mop cloth to the Velcro, and then push the mop
cloth support horizontally to install it on the sweeping and mopping robot.
Remove/install the disposable mop cloth:
after removing the mop cloth support, tear
off the Velcro to remove the disposable mop
cloth.
Attach the disposable mop cloth to the Velcro,
and then replace the mop cloth supportto
complete the installation.
Power-off and restart/restore the factory settings
If the buttons do not respond or the machine cannot be turned off, press the reset button with a needle for � second to power
off and restart the robot; press and hold for � seconds to restore the factory settings (see Page � for the button position).
Press the mop cloth support snap, and at the same time
pull the mop cloth support outwards, to remove the mop
cloth or disposable mop cloth for replacement or cleaning.
Mop cloth fixing slot