LXNAV LX8000 Скачать руководство пользователя | Manualshive

Страница: 26 / 110

background image

LX8000 (LX8080) Version 2.6

September 2011

Page 26 of 110

place). However, only one file can be the active file. The active file is used for task
creation.
Press the

ACTIVE

button to mark the selected file as active.

Press the

DELETE

button to remove the selected file from the LX8000.

Press the

SAVE

button to save way points to the SD Card or USB stick. The save dialogue

will be opened.

Change the filename if required. Press

TO USB

for saving to the USB stick or press

TO SD

for saving to the SD card. When the compatibility mode flag is checked the file will be saved
in DA4 format, which can be used with older LX devices (LX20, Colibri, LX5000, and LX7000).

CUP and DA4 also stores tasks.  Tasks will also be uploaded to the LX8000.  This
feature is very useful, if you wish to prepare tasks on a computer using SeeYou or
a similar program.  You can subsequently easily select a task via the
Task->Edit->Load option.  See Chapter 5.7.6 for more details.

5.1.5.5

Managing Airports

Select the

Airports

menu item and press the

SELECT

button. A list of all available airport

databases  will  be  shown.    Only  distributed  airport  databases  are  shown  in  this  menu;  the
user cannot modify contents of a database within the LX8000.  If an error is suspected in our
database please notify us.
If  you  wish  to  add  additional  airports  to  the  LX8000  an  ordinary  way  point  file  should  be
created  and  uploaded  as  a  way  point  file  or  use  the  LXe  program  to  modify  the  airport
database.

5.1.5.6

Managing Airports Using the LXe Program

With  LXe  program  version  3.4  or  higher  it  is  possible  to  edit  airport  data.    A  new  feature,
which applies only to the LX8000, is that each airport entry has a field called “description” in
which comments or notes of up to 250 characters can be added.
Modified airport data can readily be exported to the LX8000 as a (asapt) file and imported to
the LX8000 using the standard procedure for database updates (see Chapter 5.1.5.2).  User
modified  databases  will be  assigned  as  “user  modified”  with  a  version  of  the  database  and
date of export (modification) executed using LXe.
The  picture  below  shows  airports  that  have  not  been  modified  (as  distributed  in  initial
delivery):

«
...
24
25
26
27
28
...
»

Содержание LX8000















































































































Отзывы:

Нет отзывов

Похожие инструкции для LX8000

Бренд: YuLongDa Страницы: 13

Бренд: Garmin Страницы: 12

Бренд: Hummingbird Communications Страницы: 88

Cellocator CelloTrack LTE Plus Lighter

Бренд: Pointer Страницы: 39

Бренд: Naviter Страницы: 16

Бренд: CHEP Страницы: 8

Бренд: Qstarz Страницы: 38

iP4700 - PIXMA Color Inkjet Printer

Бренд: Canon Страницы: 437

iP4700 - PIXMA Color Inkjet Printer

Бренд: Canon Страницы: 24

Бренд: Garmin Страницы: 70

Бренд: Garmin Страницы: 2

Бренд: NorthStar Страницы: 404

Бренд: OzSpy Страницы: 19

Бренд: ANBTEK Страницы: 10

Бренд: ANBTEK Страницы: 19

VesseLINK Certus 200

Бренд: Thales Страницы: 131

Бренд: Eagle Страницы: 128

700-00004 Series

Бренд: Avidyne Страницы: 132

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды