LXNAV LX8000 страница 7 Скачать руководство пользователя | Manualshive

Страница: 7 / 110

background image

LX8000 (LX8080) Version 2.6

September 2011

Page 7 of 110

1

Important Notices

The LX8000 (LX8080) system is designed for VFR use only as an aid to prudent navigation.
All  information  is  presented  for  reference  only.    Terrain,  airports  and  airspace  data  are
provided only as an aid to situation awareness.

Information in this document is subject to change without notice.  LXNAV reserves the right
to  change  or  improve  their  products  and  to  make  changes  in  the  content  of  this  material
without obligation to notify any person or organisation of such changes or improvements.

A Yellow triangle is shown for parts of the manual which should be read very
carefully and are important for operating the LX8000 (LX8080) system.

Notes with a red triangle describe procedures which are critical and may result in
loss of data or any other critical situation.

A bulb icon is shown when a useful hint is provided to the reader.

1.1

Limited Warranty

This  LX8000  (LX8080)  product  is  warranted  to  be  free  from  defects  in  materials  or
workmanship for two years from the date of purchase.  Within this period, LXNAV will, at its
sole  option,  repair  or  replace  any  components  that  fail  in  normal  use.    Such  repairs  or
replacement will be made at no charge to the customer for parts and labour, provided that
the customer shall be responsible for any transportation cost.  This warranty does not cover
failures due to abuse, misuse, accident, or unauthorised alterations or repairs.

THE  WARRANTIES  AND  REMEDIES  CONTAINED  HEREIN  ARE  EXCLUSIVE  AND  IN  LIEU  OF
ALL  OTHER  WARRANTIES  EXPRESSED  OR  IMPLIED  OR  STATUTORY,  INCLUDING  ANY
LIABILITY  ARISING  UNDER  ANY  WARRANTY  OF  MERCHANTABILITY  OR  FITNESS  FOR  A
PARTICULAR  PURPOSE,  STATUTORY  OR  OTHERWISE.    THIS  WARRANTY  GIVES  YOU
SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE.

IN  NO  EVENT  SHALL  LXNAV  BE  LIABLE  FOR  ANY  INCIDENTAL,  SPECIAL,  INDIRECT  OR
CONSEQUENTIAL  DAMAGES,  WHETHER  RESULTING  FROM  THE  USE,  MISUSE,  OR
INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT.  Some states do
not allow the exclusion of incidental or consequential damages, so the above limitations may
not apply to you.  LXNAV retains the exclusive right to repair or replace the unit or software,
or to offer a full refund of the purchase price, at its sole discretion.  SUCH REMEDY SHALL
BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY.

To obtain warranty service, contact your local LXNAV dealer or contact LXNAV directly.

September 2011

© 2011 LXNAV. All rights reserved.

«
...
5
6
7
8
9
...
»

Содержание LX8000















































































































Отзывы:

Нет отзывов

Похожие инструкции для LX8000

Бренд: NAL RESEARCH CORPORATION Страницы: 18

Бренд: NAL RESEARCH CORPORATION Страницы: 61

nuvi 3500 series

Бренд: Garmin Страницы: 88

Бренд: CalAmp Страницы: 22

Бренд: Queclink Страницы: 19

Бренд: Navigon Страницы: 80

Бренд: I-gotU Страницы: 42

Бренд: SkyGuard Страницы: 14

Бренд: Koden Страницы: 244

BI 820 TREK OBD

Бренд: BITREK Страницы: 18

Бренд: UniGuard Страницы: 8

Бренд: UniGuard Страницы: 9

Бренд: VersaLogic Страницы: 14

Бренд: Laipac Страницы: 64

Бренд: XAiOX Страницы: 14

Бренд: S&T Страницы: 35

Бренд: T-Mobile Страницы: 16

Бренд: SM Modellbau Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды