LXE MX7 Скачать руководство пользователя | Manualshive

Страница: 23 / 60

background image

Install / Remove MX7 Desktop Cradle Adapter Cup

17

E-EQ-MX7DKRG-C

MX7 Cradle Reference Guide

Install / Remove MX7 Desktop Cradle Adapter Cup

Equipment Required --

Phillips screwdriver and torquing tool (not supplied by LXE). You will

need a torquing tool capable of torquing up to 6 (+/- .5) in/lb. LXE recommends using a clean,
well-lit stable surface.

The desktop cradle is shipped with the cradle adapter cup pre-installed.

The MX7 charging pocket, without a cradle adapter cup, is designed for an MX7

with a rubber

boot

(MX7A490PROTBOOTBLK or MX7A491PROTBOOTYEL)

enclosing/protecting the mobile

device.

Before docking an MX7

without a rubber boot

in the cradle, re-install the MX7 adapter cup.

Install --

The adapter cup is installed facing in one direction. Put the adapter cup in the MX7

charging pocket, aligning the screw hole in the adapter cup with the screw hole in the MX7
charging bay. Using a torquing screwdriver, insert the screw in the adapter cup screw hole, and
torque the screw to 6 in/lbs +/- .5 in/lbs.

Periodically check the connection of the adapter cup and re-torque if necessary.

Figure 10 MX7 Charging Pocket Adapter Cup

Remove --

Remove the adapter cup by unscrewing the single captive screw at the front of the

adapter cup. Place both the adapter cup and the screw in a protected, safe place until needed.

«
...
21
22
23
24
25
...
»

Содержание MX7





























































Отзывы:

Нет отзывов

Похожие инструкции для MX7

Бренд: Velleman Страницы: 28

JG-4IFR12.8-150-Y

Бренд: ENERpower Страницы: 10

Бренд: Velleman Страницы: 16

Бренд: Racelogic Страницы: 2

Бренд: Projecta Страницы: 16

Бренд: Core RC Страницы: 28

Бренд: venteo Страницы: 3

Бренд: everActive Страницы: 36

Бренд: MayPole Страницы: 4

Бренд: Thunder Страницы: 16

Бренд: R&S Страницы: 20

Бренд: PacWind Страницы: 21

9 26 04 096 01 0

Бренд: Fein Страницы: 63

Бренд: Adel System Страницы: 4

Бренд: Adel Страницы: 4

Бренд: Adel Страницы: 4

Бренд: August Страницы: 5

Бренд: Bluetti Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды