LXE MX7, Справочное руководство

Страница: 33 / 60

Install / Remove Vehicle Cradle Adapter Cup and Top Adapter 27
E-EQ-MX7DKRG-C MX7 Cradle Reference Guide
Underside of Retainer Cap Retainer Cap Insert
Assembled
Figure 19 Retainer Insert
The Retainer insert has three tabs.
1. Lay the flat side of the Insert against the underside of the Retainer cap.
2. The Insert back tab slides into the slot at the back of the Retainer.
3. The Insert is fastened to the Retainer cap using screws and the pre-drilled holes in the angled
tabs (one on each side).
4. The Insert is secured in place with two screws (the screws do not require a torquing tool).
Periodically check the connection of the adapter cup and re-torque if necessary. Periodically
check the Retainer Insert connection and re-tighten if necessary.