LXE MX7, Справочное руководство

Страница: 43 / 60

Attach a Serial or I/O Connector 37
E-EQ-MX7DKRG-C MX7 Cradle Reference Guide
Attach a Serial or I/O Connector
The serial cable is connected to the port labelled Serial Interface on the back of the vehicle cradle.
The serial cable can originate with a tethered scanner, a desktop/laptop PC, a printer or another
serial device.
Figure 30 Serial Connector, Power and MX7 I/O Connector
The I/O connector cable is connected to the port (male) labelled MX7 I/O Port on the back of the
vehicle cradle.
Serial Cable End MX7 I/O Cable End
Periodically test the connections for stability and re-tighten if necessary.
Serial Interface
Align the RS-232 serial cable end (female) carefully to the Serial Interface port (male) at the back
of the cradle. Firmly press the ends together and finger tighten the screws on either side of the
connector. Test the connection for stability.
Secure the cable to the cradle with the LXE-installed strain relief cable clamp (see section titled
Vehicle Cradle Strain Relief Cable Clamp
).
MX7 I/O Port
Squeeze the clips next to the connector attached to the I/O cable to open the catches in the
connector assembly. Firmly press the cable end (female) into the MX7 I/O Port connector (male)
at the back of the cradle. Release the clips in the connector cable. Test the connection for
stability.
Secure the cable to the cradle with the LXE-installed strain relief cable clamp (see section titled
Vehicle Cradle Strain Relief Cable Clamp
).