LXE MX7, Справочное руководство

Страница: 38 / 60

32 Vehicle Cradle RAM Ball Assembly
MX7 Cradle Reference Guide E-EQ-MX7DKRG-C
Vehicle Cradle RAM Ball Assembly
Figure 24 RAM Bracket Components
•
There must be enough clearance at the back of the cradle to accept an MX7 with an
installed trigger handle.
•
There must be at least 2” clearance at the back of the vehicle cradle for power, serial
interface and MX7 I/O Port cables
•
There must be enough clearance to accept an MX7 with an installed trigger handle.
•
Position the bracket to allow access to the ports on the back of the Vehicle Mount Cradle.
1. Fasten the RAM ball with the circular mounting base to the vehicle.
2. Fasten the RAM ball with the rectangular mounting base to the back of the vehicle cradle.
3. Loosen the knob on the squeeze arm.
4. Place either RAM ball opening over the vehicle mounted RAM ball.
5. Place the remaining RAM ball opening over the vehicle cradle mounted RAM ball.
6. Tighten the knob on the squeeze arm until the vehicle cradle is secured to the vehicle.
Adjust the position of the secured vehicle cradle by slightly loosening the squeeze arm knob,
rotating the cradle and then re-tightening the squeeze arm knob.
Periodically test the mounting device and retighten bolts, RAM balls and/or squeeze arm
adjustment knob as needed.