1
2
3
4
5
1
2
3
4
5
6
[ 42 ]
[ 43 ]
NOTE:
Once data migration is
complete, the Generation 2 Hub
is now the default PowerView®
Hub for the home . Disconnect
the Generation 1 Hub from power
and Wi-fi .
NOTE:
Primary Hub will be listed with
all secondary Hubs nested underneath
in a collapsible list . To access a
secondary Hub’s information, including
to rename it, simply select from this list .
NOTE:
Wait for the Hub LED to
turn solid magenta .
Secondary Hub Setup: Wireless
A secondary Hub may be introduced to your PowerView
®
network to extend the reach and strength of the network .
Any secondary Hub will be identified by its solid green LED . The primary Hub should be connected to power and its LED
should be solid blue before setting up a secondary Hub . Wireless secondary Hubs can be placed in more convenient
locations within the home without being tethered to a router .
To begin a Wireless setup of a secondary Hub, first complete instructions on page 41 for Secondary Hub
Setup: Wired. Then, follow instructions below.
DISCONNECT
all cords from
Secondary Hub.
CONNECT Secondary Hub to
Power.
NOTE:
When fully configured,
the Hub LED will be solid green .
In App,
OPEN Menu. SELECT Hub.
OPEN App and Select New Hub.
Follow WiFi configure sequence as
instructed in App .
Migrating Hub Data
Households wishing to benefit from the latest features of PowerView® only available with the
Generation 2 (Generation 2) Hub (ex . Apple® HomeKit™) but are currently using a Generation 1
(Generation 1) Hub, can easily upgrade to the Generation 2 Hub . All data from a Generation 1 Hub
(ex . Shades, Scenes, Rooms, Automations, etc .) may be seamlessly transferred to a Generation 2
Hub via Data Migration . In this scenario, the option to migrate data from a Generation 1 Hub to a
Generation 2 Hub is only available during the initial Generation 2 Hub setup procedure . Once Data
Migration is complete, there will be no interruption in access to or operation of Shades, Scenes,
Automations, etc . using the App .
In the App,
TAP Menu.
CONNECT
Generation 2 Hub to Wi-fi
router and power .
Via Ethernet Connection
TAP Hub.
TAP Migrate from Existing Hub.
TAP Setup.
TAP Start Migration.
NOTE: THE Generation 1 HUB MUST BE CONNECTED TO POWER AND TO A WI-FI ROUTER DURING THIS
PROCESS
to successfully complete Data Migration . Migrated data will be retained by a Generation 1 Hub; however,
data is not backwards transferable from a Generation 2 Hub to a Generation 1 Hub .
NOTE:
If electing to wirelessly set up a Generation 2 Hub, the App will first walk you through Airport and Accessory
Setup to establish wireless connectivity between the Generation 2 Hub and the Wi-fi router before Data Migration
can begin .
Caution:
There may be a brief delay before the App recognizes the initial availability of the new Hub once
it is plugged into power .
RELATED TOPICS
RELATED TOPICS