1
2
3
4
[ 38 ]
[ 39 ]
NOTE:
When fully completed,
Hub light will turn solid blue .
Initial App & Hub Setup
A PowerView® Hub is required to use the PowerView® App.
To connect to and/or setup a Hub for operation
of PowerView® window coverings using the App, open the PowerView® App on your mobile device and follow
the on-screen instructions . For new Hub setup, you will be guided through the setup process . This may include
Hub wireless configuration (if necessary), pairing any PowerView® remotes to a single PowerView® network (if
necessary), and pairing any PowerView® Remote to the Hub (if necessary) .
Note:
Always connect a Hub to power before beginning the setup procedure . For the installation and setup of
Generation 2 (Generation 2) Hubs, you can choose to proceed using a wireless configuration or using an Ethernet
connection .
Hub Setup: Wired
Connecting a PowerView® Hub via ethernet to an internet connected router is the most reliable
method to ensure uninterrupted internet access during Hub setup and operation .
Follow setup sequence as instructed
in App .
OPEN
PowerView® App .
SELECT
New Hub.
PRIOR TO INSTALLATION
CONNECT Hub
to:
A) Ethernet
then
B) Power.
SELECT New Setup.
NOTE:
Allow Hub to automatically
seek, retrieve, and install firmware
update . Hub LED sequence will go
from blinking aqua, to solid amber,
to blinking amber .
Do not interrupt
this process.
After a firmware
update, Hub will reboot . Firmware
update may take several minutes .
A
A
B
B
RELATED TOPICS
RELATED TOPICS