manualshive.com logo in svg

Lutz-Jesco MAGDOS LP, Руководство по эксплуатации

Описание продукта Lutz-Jesco MAGDOS LP: Предоставляется бесплатное руководство по эксплуатации. Загрузите операционное руководство с manualshive.com. Узнайте как использовать данный мануал для эффективного использования продукта. Безопасность и надежность гарантированы.

Поделиться
Скачать
background image

Operation

External On/Off via Release input

48

Solenoid-Diaphragm Dosing Pump 

MAGDOS LP

© Lutz-Jesco GmbH 2014

Operating Instructions

BA-10231-02-V03

11.2.5 Network mode (MAGDOS LP-Net only)

11.2.5.1 Selecting the operating mode

1.

Press 

Menu

.

2.

Use the 

 or 

 key to choose the 

Operating mode

 menu item 

and press 

OK

.

3.

Use the 

 or 

 key to choose the 

Network mode

 menu item and 

press 

OK

.

The dosing pump displays the start screen of 

Network mode.

Fig. 11-15: Start screen of Network mode

In 

Network mode,

 the signal that is connected to the Ethernet 

connection controls the dosing pump's stroke frequency and number of 
strokes (see page 31). In addition, it is possible to transmit in the oppo-
site direction all the disturbance and status messages (see „Addresses 
of MODBUS TCP/IP protocol (MAGDOS LP-Net)“ on page 65).

You do not need to make any further configurations in the operating 
mode.

You must, however, enter or check the IP address (see „Set "IP 
address" menu item (MAGDOS LP-Net only)“ on page 37).

The dosing pump has a globally unique MAC number for unambiguous 
identification (for example: "00-C0-3D-00-27-8B“). To uniquely identify 
the dosing pump on a TCP/IP network, it must be given an IP number 
(for example: "169.254.55.114"). The local network administrator 
assigns the IP number. There is no DHCP function to automatically 
assign numbers.

If you operate several dosing pumps on one network, their IP addresses 
must be matched with each other to differentiate them and to make 
possible unique addressing.

TCP/IP packets must conform with the Modbus TCP/IP protocol; this 
means that they can be sent from and received by the TOPAX DX Net 
multi-channel controller, by an Ethernet-capable PLC or a PC control 
console. 

You can only operate the dosing pump in a local TCP/IP network (not via 
a gateway).

The dosing pump monitors the network connection. If packets fail, the 
dosing pump automatically stops delivery. This means that the PLC or 
the PC control console must continuously trigger the dosing pump in an 
interval of less that one second.

A Web server is integrated in the dosing pump. To check the network 
connection, you can surf to the Web server from a PC with a Web 
browser and read out the current delivery capacity. Addressing is by 
means of the IP address.

For more information about parameterising the Modbus TCP/IP protocol, 
see „Addresses of MODBUS TCP/IP protocol (MAGDOS LP-Net)“ (see 
page 65).

11.3  External On/Off via Release input

Regardless of the selected operating mode, you can start or stop the 
MAGDOS LP dosing pump by means of the closed switching contact on 
the Release input.

If you set the function (see „Set "Release input" menu item“ on 
page 35), the system displays in the selected operating mode the 
symbol for configuration of the Release input (see also “Explanation of 
the menu icons” on page 32).

Fig. 11-16: Start screen of pulse input with icon for open contact

11.3.1 Starting the dosing pump

If 

Run = contact

 is set:

Close the switching contact on the Release input.

Dosing pump has started.

If 

Run = open

 is set:

Open the switching contact on the Release input.

Dosing pump has started.

11.3.2 Stopping the dosing pump

If 

Run = contact

 is set:

Open the switching contact on the Release input.

Dosing pump has stopped.

If 

Run = open

 is set:

Close the switching contact on the Release input.

Dosing pump has stopped.

11.4  Decommissioning the dosing pump

 Perform the following working steps:

1.

Stop the dosing pump in accordance with the selected operating 
mode.

2.

Unplug the dosing pump's mains plug from the power supply.

3.

Disconnect all electrical connections.

4.

Depressurize all the hydraulic parts in the system.

5.

Unplug all the hydraulic connections on the dosing pump.

6.

Empty the dosing head.

7.

Remove any residual dosing medium from the dosing head by 
flushing the system with a washing agent. Ensure that the washing 
agent is compatible with the dosing medium.

Dosing pump is decommissioned.

Network mode

Menu

Start

Liter

  h

   0%

0.00

Analog input

Menu

Start

Liter

  h

   0%

0.00

g

p

g

p

Setup

p

Содержание MAGDOS LP













































































Отзывы:

Нет отзывов

Похожие инструкции для MAGDOS LP

Watson Marlow Pumps 630 Series Installation, Operating And Maintenance Manual preview
630 Series
Бренд: Watson Marlow Pumps Страницы: 131
Eaton 2 Series Parts & Repair Information preview
2 Series
Бренд: Eaton Страницы: 57
A.O. Smith 200 Series Specification Sheet preview
200 Series
Бренд: A.O. Smith Страницы: 2
A.O. Smith 200 Series Installation preview
200 Series
Бренд: A.O. Smith Страницы: 2
Varian TriScroll 300 Series Manual preview
TriScroll 300 Series
Бренд: Varian Страницы: 19
Little Giant 5-md-sc Insctruction Manual preview
5-md-sc
Бренд: Little Giant Страницы: 8
Annovi Reverberi HRM-A Specification Sheet preview
HRM-A
Бренд: Annovi Reverberi Страницы: 4
Bryant 658A User'S Information Manual preview
658A
Бренд: Bryant Страницы: 12
Dimplex A Class User Manual preview
A Class
Бренд: Dimplex Страницы: 12
WaterGroup E75TFC-3 Installation, Operation And Service Manual preview
E75TFC-3
Бренд: WaterGroup Страницы: 24
CareFusion Alaris CC Guardrails 80033UND1-G Directions For Use Manual preview
Alaris CC Guardrails 80033UND1-G
Бренд: CareFusion Страницы: 40
Parkside PKA 20-Li B2 Translation Of The Original Instructions preview
PKA 20-Li B2
Бренд: Parkside Страницы: 195
Daikin Altherma 3 R MT F User Reference Manual preview
Altherma 3 R MT F
Бренд: Daikin Страницы: 68
Hospira GemStar Series System Operating Manual preview
GemStar Series
Бренд: Hospira Страницы: 221
Idex Sandpiper Signature Series Service & Operating Manual preview
Sandpiper Signature Series
Бренд: Idex Страницы: 18
Unitary products group SUNLINE 2000 BP 072 Installation Manual preview
SUNLINE 2000 BP 072
Бренд: Unitary products group Страницы: 40
D-D The Aquarium Solution Kamoer X2S User Manual preview
Kamoer X2S
Бренд: D-D The Aquarium Solution Страницы: 18
Johnson Controls York YH9FYH12BAH-A-X Service Manual preview
York YH9FYH12BAH-A-X
Бренд: Johnson Controls Страницы: 30

Бренды по названию

Популярные бренды

Загрузить еще бренды