Open button
Status Indicator
LEDs
Open button
2
SQE-2
Status Indicator
LEDs
SQE-RL
SQE-3D
Open button
Close button
SQE-33
SQE-3E
Infrared
Receiver
Raise/Lower
Installation Instructions
Occupant Copy
Please read before installing.
CAUTION
!
Lutron recommends that Keypads be installed by a qualified electrician.
Do not connect high-voltage power to low-voltage terminals.
Improper wiring can result in personal injury or damage to
the control or to other equipment.
Keypads must be connected to the
Sivoia QED
TM
Electronic Drive Unit (EDU) by using
Class 2 (USA)/ PELV(IEC) wiring
methods.
Check with your local electrical inspector for the local code requirements and wiring practices
allowed in your area.
Use only a cloth with warm water and mild soap to clean faceplates (no chemical cleaners).
Keypad Configurations
Status Indicator
LEDs
Raise button
Lower button
Preset button
Close button
Raise/Lower
Status Indicator
LEDs
Preset button
Close button
1
2
3
Open button
Status Indicator
LEDs
Group Selection
LEDs
Preset button
Close button
Group 1 button
Group 2 button
Group 3 button
