Lutech Datalys V650, Руководство пользователя, Страница: 133 / 168

- 124 -
Fig 17-4 IBP Parameter Setting Menu
Settings can be done on the following items:

IBP<1,2>SETUP:

ALM ON/OFF: see this chapter parameter area IBP <1,2> setup the ALM ON/OFF.

ALM LEV: see this chapter parameter area IBP <1,2> setup the ALM LEV

ALM REC: see this chapter parameter area IBP <1,2> setup the ALM REC

SWEEP: see this chapter waveform area IBP <1,2> setup the SWEEP

WAVE COLOR: see this chapter waveform area IBP <1,2> setup the WAVE COLOR.

UNIT : mmHg,kPa,cmH2O

FILTER: see this chapter waveform area IBP <1,2> setup the FILTER.

CH Press Setup: see this chapter waceform area IBP <1,2> setup the CH Press Setup

ALARM SETUP: see this chapter parameter area IBP <1,2> setup the ALARM SETUP

SCALE AGJUST see this chapter parameter area IBP <1,2> setup the SCALE AGJUST

DEFAULT: checked into the IBP <1,2> Default Settings dialog box, select "No" to abandon
the current operation, the system remains the original configuration unchanged, select "Yes",
and will be using the default settings,the original configuration will be overwritten.

IBP PRESSURE ZERO

CH1 ZERO: the IBP1 and IBP2 module into the socket, the need for invasive pressure
zeroing.

CH2 ZERO: the IBP1 and IBP2 module into the socket, the need for invasive pressure
zeroing.

CAL(calibration)

CH1 CAL VALUE: Adjustable from 80 to 300 values.

CH2 CAL VALUE: Adjustable from 80 to 300 values.

CH1 ADJUST

CH2 ADJUST
Warning