25
Betty TL2 Pro
Deut
sc
h
Engli
sh
Reserve power:
When the battery is completely discharged (all 5 red LEDs
blink with a red backlight on), the light will shut down after
flashing a few times. To activate the battery’s reserve power,
doubleclick the switch. This will give you a few minutes
more light, whose exact amount depends on the age of your
battery. The light emitted in reserve-power mode is a very low
beam so as to conserve power and keep the light going as
long as possible. The red 5 LEDs slowly flash when reservepo-
wer mode is activated and the backlight will be red.
When the
reserve power has been completely discharged, the light will
shut down – so be careful.
Note:
When operating the lamp only with
2 W or less
, no reserve power will
be available.
Warning:
Do not switch on the light when the battery is
discharged, as this will invariably
damage the battery.
Recharge the battery as soon as possible to avoid a deep
discharged battery.
Reserve power
