26
Betty TL2 Pro
Customizing the brightness levels
Press and hold the button until one
green LED
lights up.
release the button
The range of brightness levels you can select will
begin automatically to cycle,
as shown below.
Press the button at the brightness level you want.
the
first power-on click
is presented
You have the option to setup up to
4 brightness levels,
in any sequence.
0.3 W
brightness lvl
dbl click
3 W
brightness lvl
12 W
brightness lvl
45 W
brightness lvl
22 W
brightness lvl
SOS**
2 W
brightness lvl
8 W
brightness lvl
34 W
brightness lvl
16 W
brightness lvl
center (0.8W)*
28 W
brightness lvl
flash**
Default setting
Upon releasing the button,
the sequence of
brightness levels automatically restarts
, al-
lowing you to set a
second level
in the same
manner as the first click set-up. This process
can be repeated up to four times, but will
stop when you quit making further selec-
tions, thus allowing your light to operate in
1-step, 2-step, 3-step,-or 4-step modes.
4.
3.
2.
1.
*
If in use, shown by green LED
** Will not be signalised by a status LED
stealth
