20
Betty TL2 Pro
Charging and Mounting
Flashlight and charger are ready
for use upon delivery, however, the
battery is merely partly charged.
Installation to the wall or inside the vehicle
To attach the docking station, use the holes in the anodized metal rail. We recommend the use of four flat
head screws, which should be selected according to the ground. Ensure a solid foundation. It takes some
force to remove the lamp from the docking station.
Docking Station
The flashlight can be charged in many different ways:
- By the included 12V adapter
- 12V cable and cigarette lighter socket
- Through the internal socket and a Lupine standard charger (not included)
- Direct connection to 12V - 24V DC through the included cable
Hint:
We recommend you to setup the connection from an experienced vehicle builder or electrician. It is advisa-
ble to design the system in a way it is only charging when the ignition is switched on, in order to avoid dischar-
ging the vehicles battery. Always disconnect the electricity if working on the electronics. The charger at the end of
the battery compartment automatically detects the voltage (12-24V Direct Current).
+
-
Warning!
If the docking station
is directly connected to 12-24V=,
watch the polarity! Shorten the
cable to the length you need.
