21
Betty TL2 Pro
Deut
sc
h
Engli
sh
Charging with power adapter or 12V cable
With the power adapter the Betty TL2 Pro can be charged from the wall socket.
1.
Plug the supplied power adapter into your wall socket and connect it to the docking station.
2.
Make sure the lock is open. Set and press the TL2 Pro into the docking station. You must overcome a
clear pressure point. A high resistance must also be overcome when the lamp is removed. Do not be
hesitant.
3.
Charging starts automatically, the LEDs flash green. When the battery is full, the LEDs light green.
Alternative charging socket
for Charger One, Microcharger
and Wiesel.
Charge via the internal charging socket
Alternatively, the Betty TL2 Pro can also be charged with many Lupine standard chargers.
1.
Plug the charger into your wall outlet.
2.
Unscrew the rechargeable battery from the flashlight and the
charging socket becomes visible.
3.
Plug the charger into the battery compartment.
4.
If the battery is charged via the charging socket, no LEDs illuminate
at the end of the battery compartment. The feature is only available
when using the docking station.
