ISR 12-LO
•
IGAR 12-LO Operating Manual
General
•
6
1.2.1
Laser targeting light
For easy alignment to the measuring object the pyrometers can be equipped with a laser
targeting light. This is a visible red light with a wavelength between 630 and 680 nm and a
maximum power of 1 mW. The laser is classified as product of laser class II.
Warning:
To reduce the risk of injury to the eyes, do not look directly
into the targeting laser and do not point the targeting laser
into anyone's eyes. The instrument is equipped with a class II
laser that emits radiation.
Safety regulations:
•
Never look directly into the laser beam. The beam and spot can be watched safely from side.
•
Make sure that the beam will not be reflected into eyes of persons by mirrors or shiny surfaces.
1.2.2
Electrical connection
Follow common safety regulations for mains voltage (e.g. 230 or 115 V AC) connecting
additional devices operating with this mains voltage (e.g. transformers). Touching mains voltage
can be mortal. A non-expert connection and mounting can cause serious health or material
damages.
Only qualified specialists are allowed to connect such devices to the mains voltage.
1.3
Limit of liability and warranty
All general information and notes for handling, maintenance, and cleaning of this instrument
are offered according to the best of our knowledge and experience.
LumaSense Technologies is not liable for any damages that arise from the use of any examples
or processes mentioned in this manual or in case the content of this document should be
incomplete or incorrect. LumaSense Technologies reserves the right to revise this document and
to make changes from time to time in the content hereof without obligation to notify any
person or persons of such revisions or changes.
All instruments from LumaSense Technologies have a regionally effective warranty period.
Please check our website at
http://info.lumasenseinc.com/warranty
for up-to-date warranty
information. This warranty covers manufacturing defects and faults, which arise during
operation, only if they are the result of defects caused by LumaSense Technologies.
The
Windows compatible software
was thoroughly tested on a wide range of Windows
operating systems and in several world languages. Nevertheless, there is always a possibility that
a Windows or PC configuration or some other unforeseen condition exists that would cause the
software not to run smoothly. The manufacturer assumes no responsibility or liability and will
not guarantee the performance of the software. Liability regarding any direct or indirect
damage caused by this software is excluded.
The warranty is VOID if the instrument is disassembled, tampered with, altered, or otherwise
damaged without prior written consent from LumaSense Technologies; or if considered by
LumaSense Technologies to be abused or used in abnormal conditions. There are no user-
serviceable components in the instrument.
