ISR 12-LO
•
IGAR 12-LO Operating Manual
Controls and Connections
•
18
3.3.3
Connection of additional analyzing devices
Additional analyzing
instruments, for example a
LED digital display instrument
only needs to be connected
to a power supply and the
analog outputs from the
pyrometer. Other instruments
like a controller or printer
can be connected to the
display in series as shown
above (total load of
resistance max.
500 Ohm).
yellow
LED digital display
Controller
Power supply
green
brown
white
230 V ~
24 V DC
°C
Printer
3.3.4
Wait time t
w
Using a pyrometer with RS485 it is possible that the connection is not fast
enough to receive the pyrometer’s answer to an instruction of the master. In
this case a wait time can be set to slow down the data transfer (e.g.: t
w
= 02
at a baud rate 9600 means a wait time of 2/9600 sec).
Note:
Only available via interface commands, see
7, Data format UPP
.
3.4
Mechanical Installation
3.4.1
Pyrometer
To fix the converter, 4 drill holes for
screws with 4 mm diameter are
visible after removing the cover.
For fixing the optical heads different
mounting supports are available (see
2.6 Accessories (Optional)
).
Settings:
00 Bit
.
.
.
99 Bit
Drill holes
cover
