Lumascape ZDClink, Руководство пользователя

Страница: 28 / 42

28
ZDClink Linking Setup Wireless ZDClink Linking Setup
Chassis Communication and Assignment
1. Restore power to the primary controller.
2. On the facepack
Diagnostics screen, verify that the primary
controller has been "Assigned" and is "Communicating."
Note
The assigned chassis numbers do not always
correspond with the installed primary and satellite
controllers shown on the display.
3. Apply power to satellite controllers.
4. On facepack
Diagnostics
screen, verify satellite controllers
have been "Assigned" and are "Communicating."
Before proceeding, confirm that the number of total chassis
assigned and communicating equal the total number of primary
and satellite controllers.
Figure 31: Diagnostics screenshot
Wireless Communication and Assignment
Before programming, determine which Wireless Linking Module
(LINK-MOD in North America or LINK-MOD-E outside North
America) will be installed on the primary ZDClink Controller.
For more information on Wireless ZDClink Linking setup, use the
link below.