Lumascape ZDClink, Руководство пользователя

Страница: 14 / 42

14
Operating the ZDClink Controller
Language
In the Setup screen, select the language field by pressing the
scroll wheel and turning it to the desired language. Press the
scroll wheel again to finalize the selection.
• The language change will not take effect until either the Back
or the Home buttons are pressed.
Location
The Location menu is designed to graphically represent a
controller's location on a map for accurate sunrise and sunset
times based on the current date, time zone, and longitude/
latitude settings.
First, select Location from the Setup screen. While in the
Location screen, select Region . Once region is selected, scroll to
Time Zone and select the current time zone.
If latitude and longitude coordinates are known, enter the values
in the
Lat and Long fields. To set latitude and longitude using the
map feature, scroll to Map and press the scroll wheel.
• The full-screen crosshairs designate the user’s location
on the map. The map will change based on the selected
region.
• Latitude is first adjusted by rotating the scroll wheel to move
the crosshairs up and down. Numeric indicators at
the top right area of the screen will display the actual
coordinate. Press the scroll wheel to select the latitude; it is
set by pressing the click wheel.
• Next, adjust the longitude by rotating the scroll wheel to
move the crosshairs left and right.
• The coordinate settings are automatically saved after each
press of the scroll wheel. Select the Home button to leave the
Location screen.
• To initiate a reset or adjustment, press the scroll wheel and
repeat the steps listed for setting latitude and longitude.
Figure 12: Location Screen
Figure 13: Location map of the United States