Lumascape ZDClink, Руководство пользователя

Страница: 20 / 42

20
Operating the ZDClink Controller
1. Select the Test Theme checkbox to temporarily turn on all
groups that have been set in a theme. While this function is
active, a user can make adjustments to the theme and see
the changes in real time. Test theme function will end when
a key has not been pressed for five minutes, the home key is
pressed, or another theme is selected.
2. To completely clear the theme, select the Erase button. This
function clears all fields in the theme and removes the erased
theme from any existing programs.
5. Set the duration, or the amount of time that the group
will run.
6. Navigate to and select the Start button with the
scroll wheel.
7. To stop the countdown, the Stop button should be activated.
This will only pause to allow for adjustments and should not
delete any settings above.
If the group is currently running within a program, the manual
setting will take precedence.
When the manual settings are finished, the regularly scheduled
program will immediately continue operating at the next event
time, even if it was interrupted.
After manual settings have been started, the intensity and time
can be adjusted while the program is still running.
Figure 17: Themes screenshot
Manual Mode
Use Manual mode to turn on and adjust lights outside of the set
programs. Manual settings will always take precedence over any
currently running programs.
3. From the Home screen, navigate to the Manual screen using
the scroll wheel.
4. Designate a group number and then the intensity at which
the given group should be illuminated.
Figure 18: Manual screenshot