20
The alignment bolt can now be turned to change the angle of the bandwheel and track the blade. To move the blade
more rearward on the bandwheel, this bolt will need to be turned clockwise. Alternatively, turning the bolt in the
counter-clockwise direction would force the blade to run more forward on the bandwheel. Turn the bolt a 1/2 turn and
re-tension the blade.
Wearing gloves, spin the bandwheel with your hand and observe how the blade has changed tracking. Measure the
distance again and repeat the above step to further compensate if required. The ideal measurement is 9.5mm.
Once satisfied with the measurement, tighten the locking nut clockwise.
Use a 24mm socket on a torque wrench to tighten the “T” handle to 25 N.M torque. See above image.
24mm
Содержание BSW66GL
Страница 2: ......
