6
Always have a complete first aid kid available at the workplace.
The machine must be installed with a residual current device.
The machine can be only used outdoor.
Using the bandsaw mill
Warning!
Cutting tool: Always stand behind the saw carriage and keep both hands on the handle when operating
the machine. Never stand in front of the saw carriage or bandsaw blade. Never pull the saw carriage through a cut.
Warning
！
Never clean the saw blade or band wheel of a band saw using a hand-held brush or scraper whilst the saw
blade is in motion
Warning
！
Use suitable carrier equipment for transporting tensioned wide saw blades.
Warning
！
Never use the machine unless all guards and other safety devices necessary for machining are in good
working order. Check the function of the hold-to-run handle before every shift, if failed, must replace immediately.
Warning!
Risk of entrapment and rotating parts: Even slight pressure on the saw head release mechanism can
cause the saw head to drop in an uncontrolled manner and the crank to start rotating at speed, which may result in
injury.
Warning!
The clutch mechanism is very sensitive. Just slight pressure on the control when the engine is running
can engage the clutch and cause the bandsaw blade to move.
Warning!
Never make modifications to this machine that result in it no longer conforming to the original version, and
do not use it if it appears to have been modified by others. Never use any accessories apart from those that are
recommended in this user manual.
Warning!
A broken bandsaw blade can eject bandsaw blade fragments at high speed via the chip ejector. Make
sure that no one is at the side of the bandsaw mill when working. The risk of bandsaw blade breakage increases if
it has not been properly fitted or maintained.
Warning!
In case of broken band or belt if fitted, the wheels may keep running, and it is necessary to wait for the
complete standstill of the machine before opening the guard(s);
WARNING:
Do not cut lumber with foreign objects init such as nails, any metal pieces, etc.
The machine only can be used in weather conditions: temperature 5-40
°
C, and humidity 50%@40
°
C or 90%@20
°
C and altitude less than1000m.
Make sure the machine has been properly assembled and maintained in line with the enclosed assembly
instructions as well as these instructions.
Never work alone. Always make sure there is another adult within hearing distance in case you need to call for help.
Never stand between a log pile and the bandsaw mill. Always stand to the side of the log pile when handling the logs.
Never stand where there is a risk of a log falling on you.
Warning!
Adjust the adjustable saw blade guard as close to the workpiece as practicable.
Careful adjustment and regular maintenance of saw blade and band wheel cleaning equipment and of the
lubricating system will ensure that the residues do not build up.
Hazard area:
The minimum safe distances around the bandsaw mill:
Содержание BSW66GL
Страница 2: ......
