26
SAWMILL MAINTENANCE
#1 – CHANGING THE BLADE
Never attempt the below with the engine running. As a safety precaution, remove the spark plug cap. Gloves and safety
glasses must be worn when changing the blade.
Remove the tension in the blade by turning the “T” handle in the counter-clockwise direction and then open the blade
guard cover. The blade should now be loose and free to pull straight out the front. The new blade can now be installed,
guards closed and proper blade tension set.
#2 – REPLACING BELTS
Never attempt the below with the engine running. As a safety precaution, remove the spark plug cap. Gloves and safety
glasses must be worn when replacing the belts.
There are two rubber “V” belts on the sawmill and they should be replaced as a set. It is not advised to replace
individual belts separately. It is recommended to to use a BX77 cogged belt for the drive side and a BX58 follower belt.
Remove the tension in the blade by turning the “T” handle in the counter-clockwise direction and then open the blade
guard cover. The blade should now be loose and free to pull straight out the front.
BX77 Drive Belt
BX58 Follower Belt
Содержание BSW66GL
Страница 2: ......
