LUJAN USA SNIPER 5412a, Руководство пользователя, Страница: 6 / 32

STEP 1
Bolt the mast, with adjustment plates, to the base aligning
the mast as shown in fig. 1. Be sure that the threaded
adjustment plate is the top plate. Install the locknuts on the
adjustment bolts, and thread adjustment bolts loosely into
the top plate, only one or two turns at this time.
Tighten lock nuts on adjustment bolts.
Align the adjustment plates parallel to the base,
see fig.1.
STEP 2
Install optical aimer head on
mast as shown in fig. 2 by
pressing trigger lock (fig. 3)
and sliding it down the mast.
Fig. 3
Page 4 - Assembling the Aimer
Fig. 2
Fig. 1
Fig. 4
STEP 3
Check that the mast is correctly positioned. The aimer head should be parallel to the base
(fig. 4). Tighten the mast bolt with 10mmallenwrench.
CORRECT
INCORRECT