LUJAN USA SNIPER 5412a, Руководство пользователя, Страница: 12 / 32

Page 10 - Aligning Aimer to Vehicle
ALIGNING AIMER TO VEHICLE
With aimer in front of the headlight, choose two symmetrical points of the vehicle located
also at the same height (i.e. the upper part of the lamps, strut bolts, radiator support
bolts).
Points located too high, such as the vehicles roof, should be avoided: the best accuracy is
obtained using lower points.
Looking through the lateral alignment visor, make both points lie on the visor's wire, by
slightly moving the aimer, figure21.
Fig. 21
Aimer is ready to test headlight. Turn on headlights and use internal screen to aim the
light. Correct beam positioning on the aiming screen is explained on the following pages.
Proper aim for high beams, low beams, Euro beams, driving lights, and fog lights are
explained.
INCORRECT CORRECT