LUJAN USA SNIPER 5412a, Руководство пользователя, Страница: 22 / 32

AIMING EUROPEAN LOW BEAM HEADLAMPS
European low beams do not have a high-intensity zone, all the illuminated area has a
similar intensity.
European type low beams are aimed so the cutoff of the illuminated zone is located at the
horizontal and biased line.
Page 20 - Aiming Procedures - European Beam
AIMING EUROPEAN HIGH BEAM HEADLAMPS
European high beams are aimed so that the high-intensity zone is located approximately
centered on the horizontal and vertical center lines.
European low beams are
normally
at 3" (75mm or
1%) beam slope.
Set the Beam SlopeKnob at:
Use conversion chart on page 12
if the inclination is other than
1% or 1.2% and set the slope
knob accordingly.
aimed
EU
EU
10
12
as a general rule (1%),
or
if 1.2% is specified.
Set the Beam Slope Knob at
HI & LO
0