LUJAN USA SNIPER 5412a, Руководство пользователя, Страница: 21 / 32

INSPECTION LIMITS FOR FOG LAMPS
The inspection limits for symmetrical fog lamps installed with universal mounting
applications, shall be with the top edge of the high-intensity zone at horizontal or below
andwiththecenterofthehigh-intensity zone from 100mm(4")leftto100mm(4")right.
Aiming Procedures - High Beam , Auxiliary, Fog - Page 19
Inspection limits (shaded area) for the
top edge and center of the high-
intensity zone of
. FOG LAMPS
Set the Beam Slope Knob at .
LO & FOG
48
INSPECTION LIMITS FOR FOG LAMPS
The inspection limits for symmetrical fog lamps installed with universal mounting
applications, shall be with the top edge of the high-intensity zone at horizontal or below
andwiththecenterofthehigh-intensity zone from 100mm(4")leftto100mm(4")right.
Aiming Procedures - High Beam , Auxiliary, Fog - Page 19
Inspection limits (shaded area) for the
top edge and center of the high-
intensity zone of
. FOG LAMPS
Set the Beam Slope Knob at .
LO & FOG
48
AIMING FOG LAMPS
The correct aim for fog lamps with symmetrical beams (as described in SAE J583) is with
the top edge of the high-intensity zone at or below the horizontal centerline and the center
of the high-intensity zone centered on the screen.
The figure shows (shaded area
indicates high-intensity zone) a
properly aimed symmetrical
, on the
aiming screen.
FOG LAMP BEAM
Set the Beam Slope Knob to the
position
LO & FOG
48
.