Lucent Technologies Stinger IP2000, Руководство по настройке

Страница: 178 / 214

A-2 Stinger® IP2000 Configuration Guide
IP2000 Diagnostics
Enabling the debug environment
Enabling the debug environment
To access the debug environment, log in using the default super (super-user) profile.
For example:
admin> auth super
Password:
The default password for this account is Ascend . If the password has not been
changed, you should change it now to prevent unauthorized super-user access to the
system.
The debug environment contains many hidden commands and parameters that are
not intended for general use. The debug environment is not supported, and the
documentation provided here is not comprehensive.
Caution Under most circumstances, debug commands are not required for
monitoring Stinger operations, and under some circumstances, these commands
might produce undesirable results. Use the information with caution. Contact Lucent
OnLine Customer Support at
http://www.lucent.com/support with questions or
concerns.
Gigabit Ethernet diagnostics
The
gmac
command provides diagnostic output about the Gigabit Ethernet media
access controller (GMAC) driver. This command is new with the introduction of the
IP2000.
gmac
Description Provide diagnostics on the Gigabit Ethernet (GigE) driver.
Permission level system
Usage
gmac [options]
Command element Description
-v Show gmac version.
-i [-u/d] With no additional option, initialize/reset the
GigE port.
-i -u Force GigE link up.
-i -d Force GigE link down.
-n Set up network processor to communicate with
GMAC.
-s Set up a SAR channel for communicating with
GMAC .