Lucent Technologies Stinger IP2000, Руководство по настройке

Страница: 98 / 214

5-12 Stinger® IP2000 Configuration Guide
Virtual Router Configuration
Deleting a virtual router
admin> write -f
The secondary server is accessed only if the primary one is inaccessible. If both of
these client DNS servers are not accessible, the system does not allow the client to
access local DNS servers.
Deleting a virtual router
You can delete a virtual router only if no more interfaces are attached to it. If one
interface is attached to a virtual router, the system prevents its deletion. To delete a
virtual router that has no attached interfaces, delete the
vrouter profile. For example:
admin> delete vrouter vr1
Lucent Technologies recommends that you reset the system after deleting a virtual
router with active connections. If a system reset is not possible, the recommended
course of action before deleting the virtual router is to manually tear down its active
connections, and then modify the local
connection , ip-interface , and ip-route
profiles that point to the virtual router to point instead to the global router or another
existing virtual router.
Administrative tools for virtual routers
You can specify a virtual router name on the command line of the network
administration commands listed in Table 5-1 to obtain information specific to a
particular virtual domain.
Table 5-1. Administrative commands showing optional vrouter arguments
Command Permissions Usage with optional vrouter argument
arptable system
arptable [vrouter] [[-a hostname MAC_address] |
[-d hostname] | [-f]]
ipcache system
ipcache [-r vrouter] [cache] [stats]
iproute system
iproute add [-r vrouter] dest_IPaddress/subnet_mask
gateway_IPaddress [preference] [metric]
iproute delete [-r vrouter] dest_IPaddress/subnet_mask
[gateway]
netstat system
netstat [vrouter] [-i] [-r] [?] [-n] [-d] [-s identifiers]
[-z]
vrouter system vrouter [dump [full]] [callback]
nslookup diagnostic nslookup [-v] [-s dnssrvr_IPaddress] [-r vrouter] hostname
ping diagnostic
ping [-q | -v] [-i delay_sec | -I delay_msec]
[-s packetsize] [-r vrouter] [-x source_IPaddress] hostname
telnet diagnostic
telnet [-a | -b | -t] [-v vrouter] [-l[e] | -r[e]] hostname
[portnumber]