Lucent Technologies Stinger IP2000, Руководство по настройке

Страница: 116 / 214

6-16 Stinger® IP2000 Configuration Guide
OSPF Configuration
Configuring global route options that apply to OSPF
admin> set ip-options ospf-options network-type = NonBroadcast
admin> set telco-options nailed-groups = 851
admin> set mp-options enabled = no
admin> set atm-options atm1483type = aal5-llc
admin> set atm-options vci = 101
admin> set atm-options nailed-group = 851
admin> write -f
The following profile enables the unit to form an adjacency with Router-2:
admin> new ospf-nbma-neighbor router-2
admin> set host-name = router-2
admin> set ip-address = 90.90.90.2/8
admin> write -f
Configuring global route options that apply to OSPF
The ip-global profile contains several settings that apply only when OSPF routing is
in use. Following are the relevant parameters, shown here with their default settings:
[in IP-GLOBAL]
pool-ospf-adv-type = type-1
ospf-pref = 10
ospf-ase-pref = 150
ospf-global = { no yes 0 }
rip-tag = c8:00:00:00
rip-ase-type = 1
Example of importing a summarized pool as an ASE
The following commands configure a summarized pool and import it to OSPF with a
type 1 OSPF metric:
admin> read ip-global
Parameter Setting
pool-ospf-adv-type
Type of ASE metric applied to summarized pools
imported into OSPF as external routes.
ospf-pref
Preference value for routes learned from OSPF. Valid
values are
0 to 255 . The default value is 10 .
ospf-ase-pref
Preference value for routes learned from RIP, ICMP, or
another non-OSPF protocol. Specify a value from
0
through 255 . By default, routes learned dynamically
from another routing protocol are assigned a preference
value of
150 .
rip-tag
Hexadecimal number associated with routes learned
from RIP. OSPF border routers can use the tag to filter a
record.
rip-ase-type
Type of ASE metric applied to routes learned from RIP.