Lucent Technologies MERLIN LEGEND Reporter, Инструкция по установке и эксплуатации

Страница: 56 / 159

System Management
Issue 1 January 1997
3-17
a. For Direct Connect:
i. Select the PC port to connect
to the telephone system and
then the other values
EXACTLY as shown.
ii. Select OK and proceed to step
6.
b. For Collect from File:
i. Enter the name of the file (include
the complete path to the PC
directory) and the polling interval
in seconds.
ii. Select OK and proceed to step 6.
c. For PollComm:
i. Select the PC port and
baud rate to collect
SMDR and whether it
is a direct connection.
ii. Enter “remote system”
information ONLY:
Phone number. Number dialed to access the source of SMDR, in the
format expected by the modem attached to the port selected. Use the
letters “T” (for tone) or “P” (for pulse), digits, and commas “,” (for
pauses) as required — for example, T9,3816000 uses touch tone, dials
9, waits, then dials 381-6000. Not used in a direct connection.
User ID and Password. Login information to access the source of
SMDR. Use UserID and UserPswd for polling a PSU.
The UCT Difference is the hour difference between the time at the
SMDR source and Greenwich Mean Time.
iii. When complete, select OK and proceed to step 5.
5. Back at the Call Collection Interface dialog box: if you selected the PollComm
protocol, use the Schedule button to set up the polling schedule:
Use the CALL COLLECTION -
POLLING SCHEDULE WORK-
SHEET in Appendix A to plan a
timetable.
See steps a, b, and c on the
next page.