Lucent Technologies Integrated Solution II, Руководство системного администратора, Страница: 55 / 177

Administering IS-II Applications
—
The Confirm screen indicates that a subscriber has been added
or removed.
4. Press
[F6]
(CANCEL) until the IS-II Main Menu returns.
Changing Subscriber Data
You can change any subscriber data, except the extension, using the procedure
below. To change an extension, use the Move Subscriber procedure that follows.
1.
2.
3.
4.
5.
From the AUDIX Voice Power menu, select
Subscriber Administration.
Enter the extension number of the record being changed.
Press
[F4]
(DISPLAY) to display the record.
Use the arrow keys to advance to the appropriate field(s), type the change;
then press
[F3]
(CHANGE).
— The Confirm screen appears indicating the change has been made.
NOTE:
If you make a mistake, use the arrow keys to move to the field with the error;
then enter the correct information and press
[F3]
(CHANGE) again.
Press
[F6]
(CANCEL) repeatedly until the IS-II Main Menu returns.
Moving a Subscriber
At sometime, you may need to move a subscriber from one extension to another.
To move a subscriber, follow these steps:
1.
2.
3.
4.
5.
6.
4-22
From the AUDIX Voice Power menu, select
Subscriber Administration.
—
The Subscriber Administration form appears.
Type the old extension number of the subscriber that you want to move.
Press
[F4]
(DISPLAY) to display the subscriber information associated with
the specified extension number.
— AUDIX Voice Power fills in the remainder of the Subscriber
Administration form with the associated subscriber data.
If this is the correct subscriber, press
[F8]
(MOVE) to begin the move. If this
is not the correct subscriber, return to step 2.
— The Move Subscriber form appears.
Enter the new extension and press
[F3]
(SAVE).
— A window appears requesting confirmation of the move.
Type
y
to confirm the move (or
n
to cancel the move).