manualshive.com logo in svg

Lucent Technologies Integrated Solution II, Руководство системного администратора, Страница: 19 / 177

Поделиться
Скачать
Lucent Technologies Integrated Solution II Скачать руководство пользователя страница 19

Master Controller II Features

Reset Button

The reset button (brown) on the front panel resets the Master Controller II and
causes the Power On Self-Test to execute. You can use it to restart the system
without turning off the power.

For the Master Controller II+, the reset button is inside the door on the front panel
(on the left side of the compartment behind the door).

Power Button

The power pushbutton is blue and located at the bottom center of the system module
front panel; it turns the system power OFF and ON.

NOTE:

Resetting the Master Controller II or shutting the power OFF should

always be preceded by a system shutdown as described in Chapter 5,
“IS-II User Maintenance.”

The power indicator illuminates green when the system module power is on.

For the Master Controller II+, the power button is grey and located on the lower right

of the system module; it also illuminates green when the power is on.

Drive Indicators

The fixed-disk drive access indicator (on the lower center panel) illuminates amber

(green for the Master Controller II+ and located inside the door on the left) when a

fixed-disk drive is in use.

The diskette drive access indicator illuminates amber (green for the Master Controller

II+) when the drive is in use. The diskette drive has a release button; press it to eject

the diskette.

Disk Drives

The Master Controller II uses diskettes and a hard disk drive to store information.
The 3.5-inch diskettes are supported with IS-II. Fixed disk drives of 40MB, 80MB and

200MB storage capacity are available.

NOTE:

For the Master Controller II+, 100MB disk drives are available as well.

Diskette and fixed-disk drives are used to read and write to disks. Fixed-disk media
is permanently installed in fixed-disk drives and cannot be removed. Diskettes are
inserted and removed as needed.

2-3

Содержание Integrated Solution II


















































































































































































Отзывы:

Нет отзывов