Lucent Technologies CentreVu Report Designer Скачать руководство пользователя

Страница: 150 / 266

Insert | Text

CentreVu Report Designer Version 8 User Guide

Inserting Text on the Report

11-2

Inserting Text on the Report

Do not position the text on top of any tables or charts because the
table/chart will display on top of the text and the text will not be visible.

To insert a text string on a report, complete these steps:

1. Select Text from the Insert menu.

The Text Assistant appears:

2. Type the text that you want to appear on the report in the Text

contents field.

3. If you want to select a specific font for the text, select the Font

button.

If you want to leave the font set to the default, go to Step 6.

The Font selector window, which is a standard

Windows

window,

displays.

4. Select the Font, Style, Point size, Effects, and Script that will

apply to the text string you are creating.

5. Select the OK button.

The Font selector window closes.

6. On the Text Assistant window, select the OK button to insert the text

string and close the window, or select the Apply button to apply the
changes you have made and keep the window open.

The text is inserted, by default, in the upper lefthand corner of the
Design Mode window. You can use the cut, copy, or drag-and-drop
method, as outlined in Chapter 4, to move the text to the appropriate
location on the report.

*Windows is a registered trademark of Microsoft Corp.

Содержание CentreVu Report Designer











































































































































































































































































Результаты поиска

Содержание CentreVu Report Designer

Отзывы:

Похожие инструкции для CentreVu Report Designer

Бренды по названию

Популярные бренды

Lucent Technologies CentreVu Report Designer, Руководство пользователя

Результаты поиска

Содержание CentreVu Report Designer

Отзывы:

Похожие инструкции для CentreVu Report Designer

Бренды по названию

Популярные бренды