Lucent Technologies CAJUN P120, Руководство пользователя, Страница: 78 / 130

Chapter 6 Legacy CLI (Command Line Interface)
64 Cajun P120 User’s Guide
Note: These limitations apply when configuring the destination and source ports:
* The same switched port cannot be configured to be both a source port
and a destination port.
* Only a single destination port can be set at one time in the Cajun P120.
* If the destination port is 10 Mbps, you may loose packets.
* Source and destination ports should be in the same VLAN.
TFTP Configuration Group (TFTP)
This group includes TFTP configuration parameters. The table below displays the
parameters, a description of the parameters, the default values, and the valid range
of values.
To view or change these parameters, type the command
set|show tftp list
at the prompt.
Table 6.15 TFTP Group Parameters
Parameter Description
Default
Value(s)
Valid Range for Values
TFTP-OP TFTP operation setting limited limited, tftp-forever, notftp
TFTP-IP IP address of TFTP host 0.0.0.0 IP address format
TFTP-FILENAME TFTP file name P120.lst 54 characters max.
TFTP-OP Select the TFTP operation setting:
• limited – automatically attempts TFTP. If the attempt is
unsuccessful, it makes 10 more attempts. This setting is
recommended.
• tftp-forever – automatically attempts TFTP. If the attempt
is unsuccessful, it continues to try indefinitely.
• notftp – does not perform TFTP.
use the
tftp-cmd
command to start or stop the TFTP
process.
TFTP-IP Enter the IP address of the TFTP host. This is required for the
TFTP process.
TFTP-
FILENAME Enter the path and name of the TFTP list file (text file with a
list of files to be downloaded from the TFTP server). See
Appendix B, Software Download.