Lucent Technologies CAJUN P120, Руководство пользователя

Страница: 62 / 130

Chapter 6 Legacy CLI (Command Line Interface)
48 Cajun P120 User’s Guide
Using the SHLAG Command
The
SHLAG
command displays a table containing the ports that are associated with
a link aggregation group or all link aggregation groups.
For example, to show the ports assigned to all link aggregation groups:
CajunP120> shlag all
Note:
You should set all ports of a LAG to the same Duplex, Speed, VLAN, VLAN
Tagging and Administration settings.
Table 6.3 VLANTAB Parameters
Parameter Definition
port # Number of port (1-40).
Port Type Type of port. Options are dot1Qtagging or no tagging.
VLAN# VLAN to which the port is assigned.
1. LAG# 1, Members = 2
Port Role Link Duplex Speed Stations
1 Base Down auto auto 0
2 Link Down half 10MB 0
Table 6.4 SHLAG Parameters
Parameter Definition
Port Number of the ports.
Role Base port or Link
Duplex Duplex mode
Speed Speed of the port (auto, 10MB or 100MB)
station # Number of stations (MAC addresses) whose frames have
passed through this port.