Lucent Technologies 4ESS SCS, Руководство по обслуживанию

Страница: 234 / 526

234-151-077AC TAP-143
1999 June 7, Issue 9 of 8 Page
(Contd) A TABLE Codes Error CDSU-II
Recommended Error
Code
Source Reason
Action
over unit reported card Alarm
than (greater temperature
lit. LED alarm major C), 50˚
open and temperature, ambient Check
allow to doors cabinet CDSC
CDSU-II Check cooling. for ventilation
overheating of cause the determine to
filters fan properly, operating not (fans
etc.) clogged,
BLM 0404
over unit reported card Alarm
cleared, condition temperature,
cleared. LED alarm minor
BLM 0405 None.
out power reported card Alarm
alarm minor specification, of
lit. LED
the that verify to voltmeter a Use
within is CDSU the to power incoming
specifications.
BLM 0406
has power reported card Alarm
specifications, within returned
cleared. LEC alarm minor
BLM 0407 None.
are cables T1 CDSU-II that Check carrier. T1 of loss alarm, red T1
the that and connected, properly
properly are SCU and CDSU-II
cable T1 given the for configured
T1 of loss indicates Generally length.
T1’s. of reset SCU or cabling,
Interject 0501
T1 of loss alarm, yellow T1
synch. are cables T1 CDSU-II the that Check
the that and connected, properly
properly are SCU and CDSU-II
cable T1 given the for configured
problem a indicates Generally length.
reset SCU the that or cabling, T1 with
T1’s. the
Interject 0502
BLM 0503 None. alarm. blue T1
BLM 0504 None. cleared. alarm red T1
BLM 0505 None. cleared. alarm yellow T1
BLM 0506 None. cleared. alarm blue T1
is file parameter length Cable
is length cable default the bad,
used. being
executing by CDSU-II the Reconfigure
system UNIX the
/cdsconfig/bin/cdsu_setup
command.
BLM 0507
Proprietary — Technologies Lucent
instructions Company to pursuant Use