LTT i.LASER Series, Руководство пользователя

Страница: 77 / 93

Chapter 3 Operation
76
2. Job Title
The Job Title input box allows the user to input a title for the job being sent to
the engraver. The title entered will be the top line of the job file on the display of
the engraver.
3. Repetition
The Repetition section allows the user to modify the setting of [Copy] and
[Quantity] which will be shown on panel. (See section 3.2.2 )
4. Material
The Material section is used for setting up the driver for the rotary attachment.
When the Material setup checkbox is checked the Material section is enabled.
The Diameter input box allows you to enter the diameter of the object in the
rotary attachment. When checked, the [Autoshift] check box causes the driver
to ignore the vertical position of the graphic on the page. This causes the
engraver to begin engraving without initially rotating the object. This feature
allows for easier alignment of graphics on items with handles. The X axis
dropdown box is used for setting the DPI when the rotary attachment is in use.
The R axis dropdown box options no longer affect the functions of the engraver.
5. Position Mode
Temp Ref. Point
If this box is checked, the file will not execute in the position as application
software. Otherwise, it will execute in the position where user determine on
machine.
Relative Point
There are nine relative points. They are Top Left , Top Middle, Top Right,
Middle Left , Center , Middle Right, Bottom Left, Bottom Middle and
Bottom Right . Those points mean different positions on the boundary of
drawing in application software.