LTT i.LASER Series, Руководство пользователя

Страница: 64 / 93

Chapter 3 Operation
63
Configuration
Rule unit
This function can allow user to select the unit of length for system. There
are three options: step , millimeter , and inch .
Sleep mode
After the setting time, system will turn off the power of laser tube if there
is still no file being executed.
Auto run
This item has been deactivated.
Arc comp
Compensates laser output power while cutting an arc.
Position setup
Adjust X-Y axis
This function can allow user to set the position of [P1] and [P2] . Please
move the carriage to the position that you want set for [P1] or [P2] . Then
press [Enter] when the cursor is on the right side of [Set as P1] or [Set
as P2] .
Focus Length
This function can c hange focal length for auto focusing if you change the
size of focus lens.
Auto Focusing
Focusing the laser automatically. This function is the same with .
X-Y homing
Move the carriage to home, and reset the position of home if the carriage
loses position. This function is the same with .
■
X loc. 720.000mm
Y loc. 600.000mm
Z loc. 0.000mm
data is OK!
Configuration
Position setup
■
Status
About i.Laser 3000
Configuration
Position setup
Status
■
About i.Laser 3000
Laser Tools &
Technics Corp.
SN:9810000
2008/12/5 Ver 8.08