LTT i.LASER Series, Руководство пользователя

Страница: 70 / 93

Chapter 3 Operation
69
5. The iLaserTuning.prn file is a Temporary Reference Point file. The reference point
is set to Middle of the figure. Before you execute this job, please move the
carriage to the middle of material.
6. The default Power and Speed of this job are both set to 100%. Modify the
estimated power and speed setting by panel for engraving on this material. We
suggest using 100% speed and find a appropriate power value.
7. Turn on the exhaust system.
8. Execute this job.
9. After the files completes, remove the material and examine it closely or with a
magnifying glass. Choose the appropriate number that is the thinnest appearing
line.
10. Go to Advanced function in the i.Laser driver, set the Raster Tuning bar to the
number that corresponds to the thinnest line and press OK to save your settings.
160mm or larger
20mm or larger
Move the carriage
Material
-1 0 1 2 -5 -4 -3 -2 -9 -8 -7 -6 -13 -12 -11 -10 3 4 5 6 -15 -14 7 8 9 10 11 12 13 14
15
In this case, the “-1” corresponds the thinnest line. You can also try to set the
Tuning to 0 and -2, engrave small text and then compare those three results.