Network Camera User Manual
97
4.
Click
Linkage Method
and check the checkbox to select the linkage method
taken for the alarm input. Refer to
Task 3: Set the Linkage Method for Motion
Detection
in
Section 9.1.1.
5.
You can copy your settings to other alarm inputs.
6.
Click
Save
to save the settings.
10.1.4
Configuring Alarm Output
Steps:
1.
Enter the Alarm Output Settings interface:
Configuration> Event > Basic
Event > Alarm Output
.
2.
Select one alarm output channel in the
Alarm Output
drop-down list. You can
also set a name for the alarm output (optional).
3.
The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or
Manual
.
The delay time refers to the time duration that the alarm output
remains in effect after alarm occurs.
4.
Click
Arming Schedule
to enter the Edit Schedule Time
interface. The time
schedule configuration is the same as the settings of the arming schedule for
motion detection Refer to
Task 2
:
Set the Arming Schedule for Motion Detection
in
Section 9.1.1.
5.
You can copy the settings to other alarm outputs.
6.
Click
Save
to save the settings.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]