Network Camera User Manual
95
You can configure the camera to trigger the alarm when the lens is covered and take
certain alarm response actions.
Steps:
1.
Enter the video tampering Settings interface,
Configuration > Event > Basic
Event > Video Tampering
.
Figure 10-7
Video Tampering Alarm
2.
Check
Enable Video Tampering
checkbox to enable the video tampering
detection.
3.
Set the video tampering area. Refer to
Task 1: Set the Motion Detection Area
in
Section 9.1.1.
4.
Click
Edit
to edit the arming schedule for video tampering. The arming schedule
configuration is the same as the setting of the arming schedule for motion
detection. Refer to
Task 2: Set the Arming Schedule for Motion Detection
in
Section 9.1.1.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]