Network Camera User Manual
96
5.
Check the checkbox to select the linkage method taken for the video tampering.
Audible warning, notify surveillance center, send email and trigger alarm output
are selectable. Please refer to
Task 3: Set the Linkage Method for Motion
Detection
in
Section 9.1.1.
6.
Click
Save
to save the settings.
10.1.3
Configuring Alarm Input
Steps:
1.
Enter the Alarm Input Settings interface:
Configuration > Event > Basic Event >
Alarm Input
.
2.
Choose the alarm input No. and the Alarm Type. The alarm type can be NO
(Normally Open) and NC (Normally Closed). Edit the name to set a name for the
alarm input (optional).
Figure 10-8
Alarm Input Settings
3.
Click
Arming Schedule
to set the arming schedule for the alarm input. Refer to
Task 2: Set the Arming Schedule for Motion Detection
in
Section 9.1.1.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]