Network Camera User Manual
78
7.
Input the region name for ROI as desired.
8.
Click
Save
to save the settings.
Configuring Dynamic Region for ROI:
1.
Enter the ROI settings interface:
Configuration > Video/Audio > ROI
2.
Check the checkbox of
Enable Face Tracking
, and then the captured face picture
is set as region of interest.
Note:
To enable face tracking function, the face detection function should be
supported and enabled.
3.
Respectively set the ROI level. The larger the value is, the better the image
quality is.
4.
Click
Save
to save the settings.
8.4
Display Info. on Stream
Check the checkbox of
Enable Dual-VCA
, and the information of the objects (e.g.
human, vehicle, etc.) will be marked in the video stream. Then, you can set rules on
the connected rear-end device to detect the events including line crossing, intrusion,
etc.
Figure 8-4
Display Info. on Stream
8.5
Configuring Target Cropping
Purpose:
You can specify a target area on the live video, and then the specified video area can
be displayed via the third stream in certain resolution, providing more details of the
target area if needed.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]